Swing over bed |
460mm |
Max. cutting length |
350mm |
Max. cutting dia. |
250mm |
Swing over slide |
250mm |
Main spindle bore |
A2-8 |
Dia. in front bearing of main-spindle |
1:20 |
Main-spindle bore |
75mm |
Max. speed of main-spindle |
4500r/min |
Max. output torque of main-spindle |
218Nm |
Speed range of main-spindle |
Stepless |
Output power of sub-spindle |
17.7kW |
Standard chuck |
Dia. of turret |
10"inch |
Sub-spindle bore |
A2-5 |
Dia. in front bearing of sub-spindle |
Morse No.5 |
Sub-spindle bore |
35mm |
Max. speed of sub-spindle |
6000r/min |
Max. output torque of sub-spindle |
83Nm |
Speed range of sub-spindle |
無(wú)級(jí) |
Output power of sub-spindle |
13kW |
Standard chuck |
Dia. of turret |
6"inch |
X/Z/W axis rapid speed |
30/30/20m/min |
X/Z/W/Y axis strok |
195/530/530/±40mm |
Mode of rurret |
Horizontal Position 12 |
Turret indexing time (including positioning and clamping) |
0.34s |
Machining accuracy |
IT5-IT6 |
Surface roughness of workpiece machined |
Ra0.8μm |
Dia. of end face of rurret
|
270mm |
Tool size |
Ex-cycle tool |
20×20×100mm |
Dia. of shark of boring tool |
φ32 |
Selection of neighboring tool |
Option |
Max. weight of workpiece |
Disc-shaped workpiece
|
30kg |
Shaft-shaped workpiece |
60kg |
Overall weight of machine |
5500kg |
Center height (from bottom of bed) |
1074mm |
Over dimension L×W×H |
3250×2010×2190mm |
